DVB-S2 modulator / S2X modulator (CMS0025)
v10.3: August, 2020
- Fixed DVB-CID build issue.
v10.1: August, 2020
- Added frame-padding output indicator.
v9.7: July, 2020
- Xilinx Kintex7 QOR updates.
v9.5: May, 2020
v9.3: March, 2020
- Quartus OpenCore evaluation updates.
v9.1: February, 2020
v9.0: February, 2020
v8.7: April, 2019
- Added ArriaV and StratixV support.
v8.6: February, 2019
- Modelsim library rebuild.
v8.5: January, 2019
v8.3: November, 2018
v8.2: September, 2018
- Added Stratix-10 support.
v8.1: August, 2018
- Quartus OpenCore updates.
v8.0: June, 2018
- Simulation library updates.
v7.8: October, 2017
- Wide-band performance improvements.
v7.6: September, 2017
- Quartus QSYS build update.
v7.5: September, 2017
- Added wide-band pre-distortion.
v7.3: September, 2017
- Added wide-band up-conversion options.
v7.2: August, 2017
- Added further wide-band modulation options.
v6.9: February, 2017
- DVB-S2X high baudrate QOR improvements.
v6.8: February, 2017
- Corrected ACM buffering issue in DVB-S2X high baudrate mode.
v6.6: December, 2016
- DVB-S2X 64-APSK interleaver correction.
v6.4: October, 2016
- Fixed high-baud rate encoding issue for high code-rates.
v6.2: August, 2016
- High baud rate 64/128/256 APSK performance improvements.
v6.1: June, 2016
- Fixed QAM-128 APSK mapping issue.
v6.0: April, 2016
- Added TS null packet removal option.
- Added PRBS TS payload option.
- Quartus 15.1 updates.
v5.9: January, 2016
- Arria-10 high baud rate performance improvements.
v5.8: November, 2015
- Content RAM read access correction.
v5.7: August, 2015
- Quartus QoR improvements.
v5.5: July, 2015
- Added DVB-S2X time-slicing support.
v5.4: July, 2015
- Further channel filtering improvements.
- Cyclone-V high baud rate option.
- Arria-10 high baud rate option.
v4.9: May, 2015
- Stratix-IV high baud rate option.
v4.8: May, 2015
- Improved channel filter performance.
- Added high baud rate option.
- Added extended roll-off signalling.
v4.6: March, 2015
- Added further channel filter performance configuration options.
v4.2: December, 2014
- Added 0.03 roll-off filter.
v3.5: October, 2014
- Added further pipelining and performance options.
v3.1: September, 2014
- Merged ModCod and Type ports for the addition of DVB-S2X.
v3.0: August, 2014
- Allow pre-distortion block to be used with the interpolating DAC interfaces.
v2.7: July, 2014
v2.6: October, 2013
- Added optional DVB-CID simultaneous modulation.
v2.5: August, 2013
- Quartus 13.0 build updates.
v2.4: June, 2013
- Added optional CPU-free configuration.
v2.3: June, 2013
- Reduced PCR jitter at low symbol rates.
v2.2: October, 2012
- Increased pipeling within the TS adaptation block to ease PAR at high frequencies.
v2.1: March, 2012
- Modified carrier-only output level to match RMS level of the normal operation output.
v2.0: March, 2012
- Altera Megacore generation update.
v1.8: February, 2012
- Altera QSYS Avalon-interface update.
- Increased head-room through radio-interface when operating with 16-bit outputs.
v1.7: February, 2012
- Altera Megacore generation updates.
v1.6: January, 2012
- Re-structured config packs.
v1.5: January, 2012
v1.4: January, 2012